|
|
![]() Fly Tier: Lawson Devery |
|
Tying Instruction : 1) Tie on the bead first and secure it about 2mm from the eye with crossing turns of thread over the top of the bead. (This will be covered later by the thorax cover) 2) Tie in about 5cm of the green sparkle sheeting thorax cover close to the bead. Trim off the downstream end of the sheeting in a taper to help give the nymph its shape. 3) The fine tinsel I used came from a sewing shop This was made up of the tinsel and a nylon thread just strip out the thread and use the tinsel 4) Wind the thread down the hook to just behind the hook point, tie in the tail fibres and then wind the tinsel and tying thread back up to the bead to give a really fine body 5) Take two or three turns of golden olive ostrich herl around the upstream side of the bead and tie off 6) Tie in two bunches of died olive partridge hackle fibres as side beards 7) Bring the sparkle sheeting over the top of the bead, the ostrich herl and the partridge and tie off as neat small head. 8) Varnish the head using black head cement. Note : Body should be tied as slim as possible Use yellow tying thread size 8/0 max |
|
| ||||
|